Hey Phillip!
The lock housing on your Sears X Cargo XL box is riveted to the box itself. There isn't a direct replacement for it but we've had some customers successfully use the Replacement Lock Core and Key for SportRack Explorer Cargo Box # SR03807 instead.
Aside from this you'll need a completely new cargo box. Depending on the size of your current cargo box you might consider the 16 cu ft SportRack Horizon Rooftop Cargo Box # SR7016 if you end up going with a complete replacement. view full answer...
Hey Mauricio! I would be happy to take a look at your photos and see if I can track down a replacement wheel for you. Feel free to email them to me directly. view full answer...
Frank, as long as you have a Lippert Rhino Pin Box then the Curt Flex Air 5th Wheel Pin Box # LC65VR will work great. If you have something different let me know what you have and I'd be happy to help you find a replacement.
If you're unsure of what you have, check out the FAQ I've attached which goes into how you can find out what pin box your trailer has. view full answer...
This can vary from vehicle to vehicle. On the TorkLift Camper Tie-Downs # TLC3205 you were looking at, these reuse the factory hardware on the truck. If you can tell me what other kit or kits you are looking at I can let you know if they come with hardware. view full answer...
Hey Jerry,
If your breakaway kit isn't hooked up properly I suppose it could give that "trailer disconnected" code on your brake controller, but it would have to be that the wiring going to your brakes is disconnected on the circuit somewhere for that to happen.
I think you have some damaged wiring or a bad connection somewhere that needs to be fixed - this could even be where your trailer 7-Way plugs into your vehicle 7-Way socket.
I'm attaching a wiring diagram that can be used for... view full answer...
Hey Michael, I actually wasn't able to find any replacements for that fan and it also seems like the fan has been discontinued. I recommend just swapping out the entire thing with the MaxxFan Deluxe Roof Vent w/ 12V Fan # MA00-07500K.
I know it's not really what you wanted to do, but unfortunately it seems to be your best option. This vent will fit into a 14" x 14" opening, has a 12V, 10 speed fan, and includes all of the mounting hardware for install. view full answer...
It might be but I do not have any way of knowing what is currently on your 2018 Ranger Trail tandem axle trailer. If your Ranger boat trailer uses the Dexter DX7.5 Disc Brake Actuator, then the Replacement Inner Member for Dexter DX7.5L Actuator item # DX99FR would be the correct replacement inner member.
The outer housing on yours should have manufacturer's info stamped on it or a sticker to identify it. If you would like to email me this information directly I would be happy to confirm... view full answer...
Hey Michael, yes the replacement U-bolt part # F3373 that you referenced does fit the Firestone Ride Rite kit part # F2700 that would be installed on a 2008 Chevy Silverado 2500. view full answer...
Hey Ruthie, if the touchscreen you have is a remote and looks like the part # LC358601 then only solution would be to replace it. If it's a touchscreen display that is hardwired to the RV you should first try unplugging it from the RV and plugging back in to see if a hard reset brings it back. If that does not work email me back with a picture of it and/or info and I'll see if its something we offer as a replacement. view full answer...
Hey Gary,
Base rail components unfortunately aren't cross compatible between brands so you'll likely have a hard time finding new hardware unless you're just referring to the nuts and bolts. If the under bed mounting brackets are also worn you'll need a complete replacement. If it's just the nuts and bolt's you're needing then you can measure the bolt length, diameter, and grade and then thread size and just get replacements at your local hardware store.
For a complete replacement you'll... view full answer...
The mounting brackets for the Aries Bull Bar with Removable Skid Plate item # AAB35-3014 are included with the Replacement Mounting Hardware item # AA54FR you were looking at. The brackets are only available with the hardware kit. view full answer...
Thank you for providing that information. It sounds like you already know this, but you want to choose a replacement equalizer that closely matches the one that came with the trailer. Since you have an 8" measurement on your standard equalizers I recommend the MORryde Shock Absorbing Suspension Equalizers # MR27ZR. These have the same 8" measurement between the outer shackle bolt holes with a height of 3-1/2".
In addition to upgrading the equalizer I also recommend adding heavy duty shackles... view full answer...
I'm sorry to say that adding the strut assist to your existing steps is not something that is possible. They use different hinges so the only option is to replace them completely. You can choose from the following based on the width of your doorway:
-23-3/4" to 24-1/4" Wide Doorways - 3 Steps # MR45RR
-23-3/4" to 24-1/4" Wide Doorways - 4 Steps # MR75RR
-27-3/4" to 28-1/4" Wide Doorways - 3 Steps # MR65RR
-27-3/4" to 28-1/4" Wide Doorways - 4 Steps # MR85RR view full answer...
Bob, the only real way to find out what replacement wheel studs you're going to need for your 2010 Airstream Flying Cloud is to measure your current wheel bolts. You'll need a digital caliper # PTW80157 and measure every aspect of the bolt to see what or what doesn't match. view full answer...
Hello Jon, your BigTex 22' Gooseneck trailer uses oil bath hubs correct? If so, you will not add any grease, you will simply add oil after you replace the bearings. view full answer...
Hey Kelly, it looks like your 2014 Chevy Silverado 2500 requires the front tie down from Happijac 182905 but we don't have that by itself and only way to order it is the part # LC182905-182971 which is the front and rear. view full answer...
You're exactly right Scott!
In order to install the 12" Dexter Electric Trailer Brakes # 23-105-106-09 using the 4-bolt pattern you'll need to use the Mounting Bolts and Hardware # BRKH10AS with the 7/16" bolts. view full answer...
The Correct Track Trailer Alignment and Lift Kit # RR23QX has 2 mounting holes as you are able to select either a 1-1/4" rise or 2-1/4" rise depending on which hole you select to attach the brackets. view full answer...
Hello Linda thank you for your question. We carry a wide variety of RV kitchen faucets, and we very well may have a match for the faucet in your 2015 Keystone Outback 326RL. We do not have a way to cross reference a model of camper to know exactly what faucet you have currently. Generally, we would need a description and/or pictures of the faucet if you are wanting to find a direct replacement.
The link below will show you our complete selection of RV and Camper kitchen faucets. If there... view full answer...
Yes Tim, we do have replacement install hardware for the Draw Tite hitch part # 75673 with the part # RHK and it does come with the bolt leaders as well. view full answer...